Veneer, substrate and matching brought together in a construction tailored to your project.
With no minimum quantity, Les Spécialités MGH Inc. / Royflex manufactures special panels in the species, cut, substrate, backing and dimensions you require.
Our architectural panels in genuine wood veneer are manufactured in Québec for the most demanding commercial, institutional and residential projects. Whether for custom woodworking, entrance lobby design or furniture manufacturing, every panel is built to the species, substrate and dimensions your project requires.
Good to know: our veneers, regardless of species or collection, can be applied to any type of panel — paper backing, Polyback or phenolic backing — depending on your project’s requirements.
| Element | Available Options |
|---|---|
| Substrates | MDF, particleboard, plywood, HDF, Fibrex, Cora Perform, marine plywood, Royflex Eco+ and others on request |
| Dimensions | 4 × 8, 4 × 10, 4 × 12, 5 × 8, 5 × 10 and 5 × 12 feet (maximum size: 5 × 12 feet; other thicknesses available on request) |
| Sanding | Both faces at 180 grit, or finish tailored on request |
| Construction | One or two faces, balanced backing and special assemblies |
Specialized options available: formaldehyde-free panel (NuGreen, VOC-free) offered in plywood, particleboard and MDF, as well as fire-resistant (FR) and moisture-resistant (MR) versions, on request.
Species, cut (flat cut, quarter cut, rift cut or rotary), grade and color define the look of the panel. The matching of the sheets (Book Match, Slip Match, Slip & Swing and Plank Match) shapes the pattern, and their sequence, from the same log, keeps the grain continuous from one panel to the next.
The substrate determines the stability, machining and performance of the finished panel. It is chosen according to the intended use: moisture resistance, weight, screw and edge holding, or environmental requirements. MDF, particleboard, plywood, HDF, Fibrex, Cora Perform, marine plywood, Royflex Eco+ and formaldehyde-free options: we help you choose the right substrate for your project.
The backing balances the tension exerted by the face so the panel stays flat and stable over time. It is usually a secondary-grade veneer, available in different grades (back A, back 1 and back 4) depending on the desired look of the reverse side. Other species and grades are available on request.
